Actie van de week Lees meer
Laatste bestelling: 8 minuten geleden
Prijs
Merken
Toon resultaat

ledgo fresnel led lampen

      Lijst Raster Tabel
Op voorraad
Quick View
StudioKing Macro LED Ringlamp met Flitser RL-130
StudioKing Macro LED Ringlamp met Flitser RL-130

De RL-130 van StudioKing is een universele ringlamp met een vermogen van 5W en een CRI waarde van 90+. Dankzij de meegeleverde adapters bevestigt u de RL-130 eenvoudig aan uw cameralens. Door de knoppen aan de linker- en rechter zijkant van de ringlamp in te drukken, klikt u de ringlamp eenvoudig vast aan de adapterring. De RL-130 heeft een kleurtemperatuur van 4800K. De controller plaatst u op de hotshoe van uw camera. Door middel van de knoppen en het scherm stelt u de RL-130 in. Zo kunt u kiezen voor een modus waarbij de LEDs continue branden en een modus waarbij de LEDs kort oplichten op het moment dat er een foto wordt gemaakt. Optioneel kunt u alleen de linker- of rechterhelft van de RL-130 laten branden. Ook de helderheid van de LEDs kan worden aangepast. Er worden een blauwe en oranje opzetring meegeleverd, voor een warme en koude kleurtemperatuur. De RL-130 wordt van stroom voorzien door middel van vier AA-batterijen (niet meegeleverd).

Toepassing RL-130

Er zijn diverse mogelijkheden om de RL-130 in te zetten. Bij het maken van portretfoto’s creëert u bij het model mooie rondjes in de ogen (zie voorbeeldfoto). Ook bij het maken van macrofoto’s zorgt de RL-130 voor het juiste licht. Doordat de LEDs zich rondom de lens bevinden, worden schaduwen in uw foto tot een minimum beperkt. De meegeleverde adapters zijn geschikt voor lenzen met een diameter van 40,5mm, 52mm, 55mm, 62mm, 67m, 72mm en 77mm.

Let op! De flitsmogelijkheid van de RL-130 kan niet gebruikt worden met de onderstaande camera's:

  • Canon EOS 250D
  • Canon EOS 1500D
  • Canon EOS 4000D
  • Canon EOS 2000D

model 03-2018  - 08-2020

 

Verschillen RL-130, RL-160 en MRC-80FV
De RL-130 is een echte basis ringlamp, welke enkel voor close-up foto’s gebruikt wordt. Naast de continue-modus is er ook een modus waarbij er enkel licht uitgestraald wordt bij het maken van een foto, maar dit licht is niet feller dan de gewone continue verlichting. Bij de MRC-80FV is er wel sprake van een echte flits bij het maken van een foto. De RL-160 is de krachtigste van de drie, welke ook het grootste bereik heeft. De RL-160 zendt enkel continue licht uit. Daardoor is er geen losse controller nodig. Alle apparatuur, inclusief de batterijen, zitten in de ring verwerkt. Bekijk de andere twee ringlampen bij de optionele accessoires.

Levering:

  • 1x RL-130 ringlamp
  • 7x Adapterring
  • 1x Oranje kleurfilter
  • 1x Blauw kleurfilter
  • 1x Gebruiksaanwijzing
  • 1x Verpakking

 

  • Aantal LED's:                            46
  • Vermogen:                                 5W
  • Kleurtemperatuur:                     4800K
  • Instelbaarheid:                          Traploos instelbaar
  • Afmetingen:                               7 x 3,5 x 11 cm
  • Gewicht:                                    120 gram
  • Lichtopbrengst (LUX) @ 0,5m:  150
  • Lichtopbrengst (LUX) @ 1m:     36
  • Lichtopbrengst (LUX) @ 2m:     7
  • Stroomvoorziening:                    4x AA-batterij
     
Meer productinformatie
Op voorraad
Quick View
NanLite Projection Attachment mount for FZ-60 (w/ 36 degree lens)
NanLite Projection Attachment mount for FZ-60 (w/ 36 degree...

Nanlite boost the creative impact of their Forza 60 and 60B with the addition of an all new projection accessory.

Designed from the ground up by the Nanlite technical team this brand new projection attachment has been developed specifically for use as part of the Forza system.

Since their introduction, these highly capable, compact fixtures have proven themselves to be an ideal low energy source for all manner of video and photography productions, winning praise from a global audience.

Extending the range of light shaping tools developed specifically for use with the Forza, the addition of the projection accessory broadens further the creative scope of the fixture.

The Forza projector has been built around a totally new optical system created to maximise the output of the fixture’s powerful onboard COB technology, a clear step forward in efficient energy use.

Use of an aspherical lens corrects aberrations and reduces distortion, whilst an anti-reflective coating helps eliminate any shift in colour temperature to deliver a truer, more accurate output. The innovative use of texture applied to the internal housing during the manufacturing process, make edges cleaner and sharper.

Joining the existing selection of Forza light modifiers, which includes Bowens adaptor, Fresnel, and softbox options, the projector attachment features a selection of light shaping tools to further expand the creative possibilities.

An 18 blade iris allows for precision control over beam size, whilst maintaining crisp consistent shapes. The shutter accessory lets users contour and cut to create imaginative shapes. A selection of gobos, plus holder, delivers crisp patterns and textures, adding a further dimension to lighting designs.

Meer productinformatie
Op voorraad
Quick View
NanLite Projection Attachment mount for FZ-60 (w/ 19 degree lens)
NanLite Projection Attachment mount for FZ-60 (w/ 19 degree ...

Nanlite boost the creative impact of their Forza 60 and 60B with the addition of an all new projection accessory.

Designed from the ground up by the Nanlite technical team this brand new projection attachment has been developed specifically for use as part of the Forza system.

Since their introduction, these highly capable, compact fixtures have proven themselves to be an ideal low energy source for all manner of video and photography productions, winning praise from a global audience.

Extending the range of light shaping tools developed specifically for use with the Forza, the addition of the projection accessory broadens further the creative scope of the fixture.

The Forza projector has been built around a totally new optical system created to maximise the output of the fixture’s powerful onboard COB technology, a clear step forward in efficient energy use.

Use of an aspherical lens corrects aberrations and reduces distortion, whilst an anti-reflective coating helps eliminate any shift in colour temperature to deliver a truer, more accurate output. The innovative use of texture applied to the internal housing during the manufacturing process, make edges cleaner and sharper.

Capable of delivering a greatly enhanced performance, the 19° lens offers the equivalent of 17 times the core output of the fixture. Use of the reflector provides 3 times the illumination, whilst the Fresnel achieves 1.4 times the overall output
Joining the existing selection of Forza light modifiers, which includes Bowens adaptor, Fresnel, and softbox options, the projector attachment features a selection of light shaping tools to further expand the creative possibilities.

An 18 blade iris allows for precision control over beam size, whilst maintaining crisp consistent shapes. The shutter accessory lets users contour and cut to create imaginative shapes. A selection of gobos, plus holder, delivers crisp patterns and textures, adding a further dimension to lighting designs.

Lightweight, robust construction and the low heat absorbtion properties of the materials used, allows for quick, simple set up. Supplied in a sturdy, protective carry case the projector kits are also easily transportable.

Meer productinformatie
Op voorraad
Quick View
NanLite Projection Attachment for Bowens mount with 36° Lens
NanLite Projection Attachment for Bowens mount with 36° Len...


PJ-BM-19/36 Projection Attachment have compatibility for NANLITE fixtures with Bowens Mount, seamlessly aligned with Forza 200, Forza 300/300B, Forza 500, FS-150, FS-200 and FS-300. By simply attaching it to the fixture, the output can be raised to another level.

The illuminance level of Forza 500 + PJ-BM-19 Projection Attachment at 3M equals to:

  • 11 times light only
  • 3 times with reflector
  • 1 time with Fresnel in spot 10°


Refine on the Precision Optics

A refined optical system is crafted to minimize color fringing around the edge of the illumination circle. Excellent light quality is thus accomplished to satisfy users’ pursuit of pinpoint accuracy in image.

  • Degree of homogeneity: 94%
  • Distortion: 0.5%
  • CCT Accuracy: 95%


Non-curved lens: help to improve degree of uniformity and eliminate chromatic aberration, effectively decrease distortion

Optical coating: improve transmittance and CCT accuracy value

Extinction treatment on the Lens’ inner wall: make the image more homogeneous and the edge of illumination circle sharper.

Versatile and Durable as Well

With an aluminum alloy die-cast metal body, PJ-BM-19/36 Projection Attachment strikes a balance between durability and weight. Its sturdy build and quality materials give users peace of mind in creation.

No mall Deal for Construction

The philosophy of design for unshakable stabilization brings about the brand new yoke. The combination of both 5/8” baby pin and 1-1/8” junior pin means it can be mounted to any light stand on the market.

Thorough protection for safe transportation

PJ-BM-19/36 Projection Attachment and all of its accompanying accessories can be well packed inside a consolidated flight case, making transportation safety.

What’s in the box?

  • PJ-BM-19/36 Projection Attachment without Lens x 1
  • 19°/36° Lens for Bowens Mount Projection Attachment
  • Rubber Protective Cap x 1
  • B size GOBO x 4
  • GOBO Frame x 1
  • Gel Frame x 1
  • Flight Case  x 1
  • User Manual x 1
Meer productinformatie
Op voorraad
Quick View
Projection Attachment for Bowens mount with 19° Lens
Projection Attachment for Bowens mount with 19° Lens

PJ-BM-19/36 Projection Attachment have compatibility for NANLITE fixtures with Bowens Mount, seamlessly aligned with Forza 200, Forza 300/300B, Forza 500, FS-150, FS-200 and FS-300. By simply attaching it to the fixture, the output can be raised to another level.

The illuminance level of Forza 500 + PJ-BM-19 Projection Attachment at 3M equals to:

  • 11 times light only
  • 3 times with reflector
  • 1 time with Fresnel in spot 10°


Refine on the Precision Optics

A refined optical system is crafted to minimize color fringing around the edge of the illumination circle. Excellent light quality is thus accomplished to satisfy users’ pursuit of pinpoint accuracy in image.

Degree of homogeneity: 94%
Distortion: 0.5%
CCT Accuracy: 95%

Non-curved lens: help to improve degree of uniformity and eliminate chromatic aberration, effectively decrease distortion

Optical coating: improve transmittance and CCT accuracy value

Extinction treatment on the Lens’ inner wall: make the image more homogeneous and the edge of illumination circle sharper.

Versatile and Durable as Well

With an aluminum alloy die-cast metal body, PJ-BM-19/36 Projection Attachment strikes a balance between durability and weight. Its sturdy build and quality materials give users peace of mind in creation.

No mall Deal for Construction

The philosophy of design for unshakable stabilization brings about the brand new yoke. The combination of both 5/8” baby pin and 1-1/8” junior pin means it can be mounted to any light stand on the market.

Thorough protection for safe transportation

PJ-BM-19/36 Projection Attachment and all of its accompanying accessories can be well packed inside a consolidated flight case, making transportation safety.

What’s in the box?

  • PJ-BM-19/36 Projection Attachment without Lens x 1
  • 19°/36° Lens for Bowens Mount Projection Attachment
  • Rubber Protective Cap x 1
  • B size GOBO x 4
  • GOBO Frame x 1
  • Gel Frame x 1
  • Flight Case  x 1
  • User Manual x 1
Meer productinformatie
Omschrijving Merk Art. Nr. Prijs incl. BTW Aantal Bestellen
Bresser LG-500 FL-0A correctie filter 3200K
Bresser 342020502 € 9,45 Bestellen
NanLite Bouncer with Suction Cup
Nanlite Nanlite NL-AS-BSC € 11,95 Bestellen
Bresser LS-600 FL-1A correctie filter 3200K
Bresser 342011305 € 15,95 Bestellen
Bresser LG-600 FL-1A correctie filter 3200K
Bresser 342012305 € 15,95 Bestellen
Bresser LS-900 FL-2 diffuus filter
Bresser 342011302 € 18,50 Bestellen
Bresser LG-1200 FL-3 diffuus filter
Bresser 342012303 € 21,50 Bestellen
Bresser LS-1200 FL-3 diffuus filter
Bresser F000500 € 21,95 Bestellen
LedGo D600 Diffusing Hood
LedGo LedGo LG-D600DH € 28,95 Bestellen
LedGo D1200 Diffusing Hood
LedGo LedGo LG-D1200DH € 39,95 Bestellen
LedGo D1200 Filter Set
LedGo LedGo LG-D1200FS € 39,95 Bestellen
Nanlite Bowens mount Projection Attachment GOBO Set 1
Nanlite Nanlite NL-AS-GB-BM-S1 € 58,95 Bestellen
Nanlite Bowens mount Projection Attachment GOBO Set 2
Nanlite Nanlite NL-AS-GB-BM-S2 € 58,95 Bestellen
NanLite FM-mount Projection Attachment GOBO Set 1
Nanlite Nanlite NL-AS-GB-FZ60-S1 € 59,95 Bestellen
StudioKing Macro LED Ringlamp met Flitser RL-130
StudioKing 571642 € 62,95 Bestellen
NanLite Adjustable Iris Diaphragm for PJ-FZ60
Nanlite Nanlite NL-PJ-FZ60-AI € 73,95 Bestellen
Nanlite Adjustable Iris Diaphragm for Bowens mount Projector Attachment
Nanlite Nanlite NL-PJ-BM-AI € 78,95 Bestellen
LedGo T1440MC Honeycomb
LedGo LedGo LG-T1440MCH € 88,95 Bestellen
Bresser SS-22 Quick-Fit Softbox Octa 95cm + Grid
Bresser F001191 € 109,95 Bestellen
NanLite 36° Lens for FM-mount Projection Attachmen
Nanlite Nanlite NL-PJ-FZ60-L36 € 158,95 Bestellen
NanLite 19° Lens for FM-mount Projection Attachmen
Nanlite Nanlite NL-PJ-FZ60-L19 € 158,95 Bestellen
NanLite 36° Lens for Bowens mount Projection Attachment
Nanlite Nanlite NL-PJ-BM-L-36 € 298,95 Bestellen
NanLite 19° Lens for Bowens mount Projection Attachment
Nanlite Nanlite NL-PJ-BM-L-19 € 318,95 Bestellen
NanLite Projection Attachment mount for FZ-60 (w/ 36 degree lens)
Nanlite Nanlite NL-PJ-FZ60-36 € 319,95 Bestellen
NanLite Projection Attachment mount for FZ-60 (w/ 19 degree lens)
Nanlite Nanlite NL-PJ-FZ60-19 € 319,95 Bestellen
NanLite Projection Attachment for Bowens mount with 36° Lens
Nanlite Nanlite NL-PJ-BM-36 € 638,95 Bestellen
Projection Attachment for Bowens mount with 19° Lens
Nanlite Nanlite NL-PJ-BM-19 € 668,95 Bestellen
      Lijst Raster Tabel